Tabla De Contenido - Teleco TVPLA868AC2 Manual Del Usaurio

INDEX
1 Connections, adjustments and control unit warnings
2 MOTOR CONFIGURATION
2.1 Pergola with 1 motor
2.2 Pergola with 2 synchronized motors
2.3 Pergola with 2 independent motors
3 TRANSMITTERS
3.1 Radio codes memorization
3.2 Radio codes deletion
3.3 Remote memorization of other radio codes
3.4 Remote deletion of a radio code
4 SENSORS
4.1 WIND sensor
4.2 TEMPERATURE sensor
4.3 SNOW condition
4.4 RAIN sensor
4.5 Modification of the alarm automatic angles
5 FURTHER DETAILS
5.1 Troubleshooting (what to do IF...)
5.2 Replacing the control unit
5.3 Quick learning of limit switches
6 Technical specifications
WARNINGS
The product at issue must be installed, commissioned and maintained only by licensed and authorised people,
respecting the laws concerning the automatic covers. All the connections must be rated for a single-phase 230Vac power
supply. For the disconnection from the power line, use an all-pole switch with contacts having a dimension of at least 3,5mm.
Only suitable materials for the connections must be used to guarantee insulation that complies with current standards on
the subject of electrical safety. The receiver only carries out movement commands and all safety devices required by the
system must be arranged separately. Before the connection to the power supply make sure that the sensors and motors are
correctly connected. A faulty connection of the motors (polarity inversion) could damage them together with the connected
mechanical elements. To prevent infiltration of water, wire the product as follows:
The manufacturer, Teleco Automation s.r.l, declares that the type of radio equipment is compliant with Directive 2014/53/
EU. The full text of the EU compliance declaration is available at the following Internet address: www.telecoautomation.
com/ce. In the view of a constant development of their products, the manufacturer reserves the right for changing
technical data and features without prior notice.
INFORMATION TO USERS under art. 14 of the 2012/19/EU DIRECTIVE OF THE EUROPEAN PARLIAMENT AND
COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE). The crossed bin symbol on the
equipment, or its packaging, indicates that the product must be collected separately from other waste at the end of its
useful life and not with mixed urban waste. Please contact your municipality, or local authority, for all information regarding
the waste sorting systems available in the area. The retailer is obliged to collect the old equipment free-of-charge when
the customer buys a new equivalent equipment. This is to encourage correct recycling/disposal. Appropriate waste sorting
for the subsequent recycling,reatment and disposal in an environmentally sound way of the disused equipment avoids
negative effects on the environment or human health and favours the re-use or recycling of the equipment's materials.
-----------------------------------------------------------
---------------------------------------------------------------------
-------------------------------------------------------------------------------
-----------------------------------------------------------
-----------------------------------------------------------
--------------------
page 3
pages 4 - 7
pages 8 - 10
pages 11 - 13
page 14
page 15