Leggett & Platt Performance Serie Manual Del Usaurio página 10

STEP 9
Install mattress retainer at the foot end of the adjustable base as follows:
a. Locate grommeted holes at foot end of base.
b. Place mattress retainer ends into grommeted holes in top surface
of adjustable base (FIGURE 6). Press down until horizontal retainer
section is flush against base.
FIGURE 6
NOTE: If base is to be set up without a headboard, basic installation
is now complete. If headboard is to be installed, proceed to
Headboard Bracket Installation. (Headboard Bracket sold as
accessory.)
10
Performance Models Scape/Scape+ Owners Manual 99301472-c
INSTALLATION
MATTRESS
RETAINER