Leggett & Platt Performance Serie Manual Del Usaurio página 12

STEP 10
Install headboard brackets to the adjustable base frame as follows:
a. Using the remote control, raise the head section of the base as far as it
will articulate to gain access to the adjustable base frame.
b. Slide one headboard bracket channel onto one side of the base frame.
Using (2) carriage bolts/nuts attach channel to base frame (FIGURE
8). Hand tighten bolts/nuts (loosely) to allow adjustment of the
headboard bracket channels. Repeat procedure to install the other
headboard bracket channel to the other side.
FIGURE 8
USE (2) 3 INCH CARRIAGE BOLTS AND NUTS
TO ATTACH EACH BRACKET CHANNEL TO
BASE FRAME EXTENSION
BASE
FRAME
12
Performance Models Scape/Scape+ Owners Manual 99301472-c
INSTALLATION
SLIDE HEADBOARD
BRACKET CHANNEL
OVER THE BASE
FRAME EXTENSION