Leggett & Platt Performance Serie Manual Del Usaurio página 15

STEP 4
Press the head down button on the remote control until the head
section is flat, then press the foot down button on the remote
control until the foot section is flat (FIGURES 12 and 13).
FIGURE 12
HEAD
DOWN
BUTTON
SCAPE
REMOTE
CONTROL
STEP 5
Remove two (2) 9 volt batteries from power brick. Plug power cord
back into electrical power source (FIGURE 14). When power is
restored from outage, base is ready to resume normal operation.
FIGURE 14
POWER DOWN OPERATION
FIGURE 13
FOOT
DOWN
BUTTON
SCAPE+
REMOTE
CONTROL
Performance Models Scape/Scape+ Owners Manual 99301472-c
HEAD
DOWN
BUTTON
FOOT
DOWN
BUTTON
15