Filling The Sintering Bowl With Pearls And Powder - Amann Girrbach ceramill argovent 2 Modo De Empleo

7.1 Filling the sintering bowl with
pearls and powder
NOTE:
Impairment of the sintering results!
Abrasion from the sintering bowl can selectively
cause shiny areas on the sintering object.
▷ Do not scrape against the sintering bowl bot-
tom with a hard object.
▷ Place separating disc [4] into sintering bowl [5].
Fig. 19
▷ Put sintering bowl on suitable precision scale
and add approx. 2.5 g of auxiliary powder only
on the centre of the separating disc.
Fig. 20
A P P L I C A T I O N A N D O P E R A T I O N
NOTE:
Possible reaction with sintering bowl!
▷ Distribute powder only on separating disc!
Minor quantities on the bowl bottom aside of
the disc are harmless, but should possibly be
avoided.
▷ Carefully distribute powder centrally on sepa-
rating disc using a suitable instrument (e. g.
metal tweezers).
4
5
Fig. 21
NOTE:
Danger of breakage of sintering bowl/cover!
With too many sintering pearls in the sintering
bowl, the pressure on the sintering bowl/cover
increases.
▷ Do not fill in more than 150 g of sintering
pearls.
5
▷ Carefully pour 150 g of sintering pearls out of
the can centrally onto the disc and smoothen
out by gently shaking the bowl.
E N
5
31