Work Pro WPE 26N Guía Rápida página 12

WPE 26N (Interface) OUTPUTS
Complete Response
Clicking this tab at the bottom of the interface, you can visualize graphically as is response curve of different outputs
after setting their parameters.
The boxes on the left are used to select the output to be displayed.
WPE 26N (Feedback & Presets)
The top of the interface shows the feedback, presets and command generation OSC sections.
Feedback
This section shows the MUTE controls and LEDs of WPE 26N device placed on the front panel. Thus, you can check
the status of each input or output (they show if signal is present, a clip level or whether each input or output is muted both
physically and through software).
Quick Guide
- 11 -
WPE 26N
www.work.es