Front Wheel Lock - BABYTREND ST28C20A Manual De Instrucciones

ASSEMBLY
AIR FLOW PANEL
10) • To open the air flow panel on the
back side of the seat, unzip the the
2 side panels. Roll the flap up and
use the buckled straps to hold it
open. Reverse this step to close the
air flow panel (Fig. 10).
• To avoid creasing on the rolled up
view window, always close it when
folding the stroller frame.
Zipper-1
7
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Buckled Straps
Zipper-2
Fig. 10
BRAKES
WARNING:
Always
set brakes when the stroller
is not being pushed so
that the stroller will not roll
away. NEVER leave stroller
unattended on a hill or
incline as the stroller may
slide down the hill.
11) • To engage brakes, apply light downward
pressure to rotate the brake lever
located on the rear wheel. The stroller
may require slight forward or rearward
movement in order to line up the teeth on
the brake with each wheel brake cluster
(Fig. 11a).
NOTE: Gently attempt to roll the stroller
forward to check that the stroller will not
move. If applied correctrly the stroller will
not roll.
• To release, gently rotate up on the brake
lever (Fig. 11b).

FRONT WHEEL LOCK

12) • The front wheels are equipped with a
swivel locking device. Push the button on
each wheel upwards to engage the locks
and push downward to disengage the
locking device (Fig. 12a).
NOTE: Remove the wheels for storage:
Press the release latch and pull the
wheels out (Fig 12b).
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
Fig. 11a
Fig. 11b
Fig. 12a
Fig. 12b
8