13.- PHONO 2 / LINE 2 Switch
Selector between phono input or line input, both Channel 2
14.- Input Channel 2 (CD2)
Allows connect a CD player
15.- Input Channel 2 (LINE2, Phono2)
"Line 2" use it to connect audio players CDs, MP3 players,
etc. or phono; The turntable have always had an output level much
lower than the level of line (the line level is the level of output of most
playback devices: CD player, MP3 player, TV tuner or radio): This
output level of the turntable, known as phono level, requires a specific
preamplifier.
16.- PHONO 1 / LINE 1 Switch
Selector between phono input or line input, both Channel 1
17.- Ground for Channel 1
Allows to ground the audio signal from Channel 1 in order to avoid noise
(home)
18.- Microphone input
Allows you to connect a
18
balanced or unbalanced microphone
(Canon connector or 6.3 mm plug)
19.- Headphones input
6.3mm plug to connect headphones
19
ENGLISH-12