Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
order to avoid undesired operations.
This function is useful as a childproof
safety.
Activating the function.
To activate this function, touch sensor
(6) for at least one second. The
symbol
appears flashing on the
power indicators (4). To deactivate
the function, just touch sensor
(6) again.
Deactivating the function.
If the on/off sensor
to turn off the appliance while the
"Childproof Lock " function is activated,
it won't be possible to turn the hob on
again until it gets unlocked. When the
hob is switched off and "Childproof
Lock " function is activated, the
symbols
will remain illuminated
around 1 minute. After that they will
be off. Trying to switch on the hob in
this condition, the symbol
flashing again on the power indicators.
Silencer of the beep
Immediately after switching on the
hob, if "Timer" sensor
"Stop&Go" sensor
(7) are pressed
simultaneously for three seconds,
the beep that accompanies each
action will be deactivated. The power
indicators (4) will display "OF".
This deactivation will not be applied
to all the functions, as for example the
beep for on/off, the ending of the timer
or the locking/unlocking of the touch
keys always remain activated.
In order to activate again the beeps that
accompanies each action, press again
simultaneously "Timer" sensor
and "Stop&Go" sensor
seconds. The power indicators (4) will
display "On"
Stop&Go Function
This function puts the cooking process
on pause. The timer will also be
paused if it is activated.
Activating the function.
Touch "Stop&Go" sensor
power indicators (4) will show the
symbol
been paused.
Deactivating the function.
Pressing again the "Stop & Go" sensor
(7), will resume the cooking in
the same conditions of power levels
and timers which were set prior to
the pause.
(1) is used
Power Function
This function supplies "extra" power
to the plate, above the nominal value.
Said power depends on the size of the
plate, with the possibility of reaching
the maximum value permitted by the
generator.
appears
1 Twist the knob (2) rightwards
until power level 9 and wait for
a second. Twist the knob again
rightwards until a P is shown in its
corresponding power indicator (4).
2 The power level indicator (4) will
(8) and
show the symbol P, and the plate
will start to supply extra power.
The "Power" function has a maximum
duration specified in Table 1. After this
time, the power level will automatically
adjust to 9. A beep sounds.
On activating the "Power" function in
one hotplate, it is possible that the
performance of some of the others
may be affected, reducing its power to
a lower level, in which case this will be
displayed on its indicator (4).
Deactivation of "Power" function,
(8)
before its working time finishes, twist
(7) for three
the knob (2) and choose a different
power level.
Minute Minder With
Switch-Off Function
(countdown clock)
This function facilitates cooking given
that you don't have to be present: You
can set a timer for a plate, and it will
(7). The
to indicate cooking has
turn off once the desired time is up.
F o r t h e s e m o d e l s , y o u c a n
simultaneously program each plate
for durations ranging from 1 to 90
minutes.
Timing one plate.
Once the power level is set on the
desired zone and during the selection
zone's dot is blinking, the zone will be
able to be timed.
For that:
1 Touch sensor
(8). The timer
indicator (5) of the selected plate
will show flashing "00". The light
ring of the knob will change to blue
color. If no action is performed on
the knob and no time is set, after
a few seconds, the timer will be
switched off.
2 Immediately after, turn the knob (2)
rightwards and select a cooking
time value between 1 and 99
minutes. If the first turn, from "00", is
done leftwards, the initial time value
will be 60 minutes. In both cases the
knob (2) has to be turned leftwards
to return the time to 00. Anytime the
time value is set to "00", if you turn
left the knob (2) the initial time value
will be 60 minutes.
3 When the timer indicator (5) stops
flashing, it will start counting down
the time automatically. When the
remaining time is 1 minute, the
countdown will be in seconds.
Once the selected cooking time has
elapsed, the heating zone being timed
is turned off and the clock emits a
series of beeps for several seconds.
To turn off the audible signal, touch
any sensor. The timer indicator (5)
will display a 00. If the heating zone
turned off is hot, its power indicator
(4) will display the H symbol.
If you wish to time another hotplate
at the same time, repeat steps 1 to 3.
Changing the programmed time.
If you wish to modify the timer the
before programmed time is up:
1 Select the desired plate.
2 Twist the knob (2) rightwards
EN
33
Publicidad
Tabla de contenido
