Steamfast SF-145 F Guía De Usuario página 5

•
The Handle (1) connects to the top of the Telescopic Pole, and is designed for maximum grip and comfort.
•
The Telescopic Pole (2) connects the Mop Head to the Handle, and can be extended and retracted for
comfortable use and convenient storage.
•
The Extension Lock (2
A
•
The Cord Brackets (3) provide a convenient way to neatly wrap the power cord for storage.
•
The Solution Tank (4) is the internal reservoir where Cleanfast HARD FLOOR Solution can be added
for use during mopping.
•
The Solution Tank Plug (4
fill hole.
•
The Mop Head (5) is the unit's main body, housing the Boiler and producing steam through the Steam Nozzles.
•
The Solution Nozzle (6) is the front-mounted nozzle that sprays a burst of solution from the Solution Tank
outwards in front of the unit whenever the Solution Spray Button is pressed.
•
The Floor Lights (7) are four front-mounted LED lights, designed for illuminating dark or difficult-to-see areas to
ensure more thorough cleaning, as well as attractive accent lighting. The Floor Lights will only function if the
On/Off Switch has been pressed to activate the unit's main power.
•
The Floor Light Switch (8), located on the back-right side of the Mop Head, is the foot operated button that
activates and deactivates the Floor Lights.
•
The On/Off Switch (9), located on the back side of the Mop Head, is the foot-operated button that activates and
deactivates the unit. The On/Off Switch is pressed to turn the unit on (the red Power Indicator Light will illuminate),
then pressed again to turn the unit off (the red Power Indicator Light will turn off).
•
The Boiler (10) is the internal reservoir where water is held and converted into steam. For optimal steam
production, the Boiler should be filled with no more than 10 oz. (300 ml.) of water.
•
The Boiler Cap (10 ) is designed to safely contain steam inside the Boiler, while providing easy access to the
A
Boiler's fill hole. The Cap must be unscrewed and removed in order to fill the Boiler with water.
•
The Solution Spray Button (11), located on the back-left side of the Mop Head, is the foot-operated button that
controls the unit's solution spray function. When pressed, a burst of solution contained in the Solution Tank will
be sprayed from the Solution Nozzle.
•
The red Power Indicator Light (12) illuminates whenever the power cord is plugged into an electrical outlet and
the On/Off Switch is pressed, to indicate that unit is receiving power.
•
The green Heating Indicator Light (13) illuminates while the Boiler is actively heating water. When the Boiler is
empty, the Light will turn off.
•
The Steam Nozzles (14), located on the bottom of the Mop Head, evenly disperse the flow of steam produced
by the Boiler.
•
The Pad Grips (15), located on the bottom of the Mop Head, are designed to adhere to fastener strips on the
Microfiber Pads.
•
The Microfiber Pads (16) each attach to the Pad Grips on the bottom of the Mop Head. The Pads are designed
to clean scuffs and stains from hard floors. The Microfiber Pads are reusable and machine washable. Two
Pads are included.
•
The Carpet Glider (17) fits around the Mop Head / Microfiber Pad, and is designed to allow the unit to effortlessly
move over carpeted surfaces.
•
The Resting Pad (18) serves as a base for the unit, providing a convenient place for it to rest as the Boiler
heats and cools without risk of damage to delicate floor surfaces. The Resting Pad has a smooth side and a
textured side – the textured side is designed to capture excess moisture and should face upward, so that Mop
Head rests on top of it.
•
The Measuring Cup (19) provides an easy and convenient way to consistently fill the Boiler with the optimum
amount of water (10 oz. / 300 ml.).
•
The Funnel (20) provides an easy and convenient way to fill the Solution Tank with Cleanfast HARD FLOOR
Solution.
•
The 32 oz. Cleanfast HARD FLOOR Solution (21) is a specially formulated, non-toxic and biodegradable
solution that is designed to enhance steam cleaning to eliminate the toughest scuffs and stains. When used on
most any hard floor surface during steam mopping, overall cleaning effectiveness is increased beyond what
either steam or the Solution is capable of alone. For best results, pour Cleanfast HARD FLOOR Solution into
the unit's Solution Tank, where it can be conveniently sprayed from the Solution Nozzle.
CAUTION: Before using Cleanfast HARD FLOOR Solution, carefully read all instructions and
precautions on the bottle label.
) is used to adjust the length of the Telescopic Pole.
) is the rubber plug which must be removed in order to access the Solution Tank's
A
5