Pulmic INDUSTRIAL 15 + VITON Manual Del Usuario página 26

CONNECT THE CHARGER ONLY IN INDOORS. IN DRY
PLACES & AWAY FROM CHILDRENS.
DO NOT USE THE CHARGER IN EXPLOSIVE ENVIRON-
MENTS. DO NOT LEAVE THE SPRAYER IN OUT DOORS. &
WITH TEMPERATURES BELOW ZERO.
DO NOT OPEN THE BATTERY OR KEEP NEAR ANY HEAT
SOURCES. LEAVE WASTED BATTERIES IN AN AUTHORI-
ZED PLACE.
MOTOR & PUMP
The motor, the pump and the pressure switch
are sensitive items subject to wear, they are
integrated into a single module and need
preventive maintenance to extend.
To keep the pump head in proper opera-
ting condition after each application, run
the sprayer with clean water in open circuit for a few minu-
tes.
Never let the pump with phytosanitaries and acid chemicals
inside over 8 hours, these products may precipitate or agglu-
tinate causing clogging and malfunction thereof. Furthermo-
re, if such products contain significant concentrations of
organic solvents or solvents will damage the internal
elements thereof.
Do not use any corrosive acid, and if you do so by accident,
immediately clean the tank and clean the circuit with clean
water in open circuit circulating it for some time.
To preserve the engine, do not put it in any kind of liquid and
protect it from moisture as far as possible.
This motor is a motor with brushes, continuous current DC
motor, its wear and life depends exclusively on the above
mentioned items & remarks, the temperature and the working
pressure.
26
Li-ion
-