Frothing Milk - Premium PEM615P Manual Del Usuario

Frothing milk

Slowly turn
the selector
knob
9） Place a cup to collect the coffee. Push the coffee
switch and espresso coffee will begin brewing.
10) When the amount of coffee in cup is the desired, turn
the coffee switch OFF. This will stop the flow of brewed
coffee.
1) Push the steam switch and the Heating Indicator Light
will be ON until the ideal steam setting temperature is
reached. Once the steam temperature is reached, the
Heating Indicator Light will turn OFF automatically.
2) Hold a cup half filled with milk by the handle (for best
result, milk should be chilled in the refrigerator prior to
use)
3) Insert steam nozzle with frothing attachment just under
the surface of the milk (for best results, milk should be
Heat
chilled and preferably skim or 1%).
Indicator
4) Slowly turn the selector knob with free hand clockwise
Light
to the steam position. This step must be done only when
the Heating Indicator Light has turned OFF.
5) Move the cup in a circular motion and allow steam to
froth the milk for several seconds.
6) After frothing, insert the steam nozzle and frothing
attachment to the bottom of the cup for just 2 to 3
seconds to warm the milk. Remember cold skim milk
froths more easily. Overheating milk will break down the
bubbles.
7) After removing the steam nozzle from the frothed milk,
Frothing
turn selector knob to steam position momentarily to clear
attachment
the nozzle of remaining milk.
8