Ribind K 2007 Manual De Instrucciones página 27

OPTIONALs -
r
ADIO TrANsMITTEr sUN
SUN 2CH code ACG6052
SUN CLONE 2CH code ACG6056
C
ODE LEArNIG sYsTEM rADIOrECEIVErs
RX433/A super eterodyne and coupling
RX433/A super eterodyne and terminal board
RX433/A 2CH super eterodyne, 2 channel and coupling code ACG5051
RX433/A 2CH super eterodyne, 2 channel and terminal board
s
PArK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency
of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came
Into contact with the external copper sheath, since this would
prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
sPArK BLINKEr WITH IN-BUILT INTErMITTENT CArD
LATErAL sUPPOrT
sPArK ANTENNA 433
P
UsH-BUTTON fLAT
for the connections and the technical data of the fixtures follow the relevant handbooks.
SUN 4CH code ACG6054
SUN CLONE 4CH code ACG6058
code ACG5055
code ACG5056
code ACG5052
code ACG7059
code ACG7042
code ACG5452
code ACG2013
B
LOCK
KEY SELECTOR FOR WALL-INSTALLATION
KEY SELECTOR TO BUILD-IN
f
IT sLIM
PHOTOCELLs for the wall-installation
PAIr Of COLUMNs fOr fIT sLIM
FIT SLIM photocells have synchronism function in AC current and
ranges of 20 m.
You can fit many photocell couples close together thanks to the optional
synchronizing circuit sYNCrO TrANsMITTEr TX sLIM sYNCrO
code ACG8029 for more than 2 photocells couples (up to 4).
T
OUCH
MECHANICAL STRIP L = 2 m - CERTIFIED EN 13849-2 (2008)
CATEGORY 3
P
rOBE
The probe detects the motor temperature to operate the heating system
under low temperature conditions, up to -30°C (connect to connector
J8).
27
27
G
B
code ACG1053
code ACG1048
code ACG8032
code ACG8065
code ACG3015
code ACG4665