3 Using the Car Recorder
3.1 Recording Videos
3.1.1 LDWS (Lane Departure Warning Systems)
When LDWS is enabled after satellite positioning, camcorder will give a
voice alert and display an alarm screen if vehicle speed reaches or
exceeds 50 km/h (31 mile/h) and the vehicle deviates from the original
lane.
To set the LDWS (Lane Departure Warning Systems), do the following:
1.
Ensure the camcorder is
connected to the power adapter
and is receiving power.
2.
Touch
Menu.
3.
Touch
Driving Safety Main Menu.
4.
Touch
for entering LDWS function menu,
then touch
enable the function (on).
5.
Touch
6.
After enabling LDWS, the screen will display align icon
please adjust the camcorder so that the horizontal line and the eye
level are overlapped and the slash lines are centered in the driving
lane. Make sure that align icon will not be obscured (e.g. hood)
during installation, it may cause misjudgment if the endpoint is
obscured.
to enter Main
to switchover to
/
to select
again to
to return to record screen.
10
,