Electrical Information - Vintec VWUD044BAB Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Information
6

Electrical Information

The Wine Cabinet must be plugged
into its own dedicated 115 Volt, 60
Hz., 15 Amp, AC only electrical outlet.
The power cord of the appliance
is equipped with a three-prong
grounding plug for your protection
against electrical shock hazards.
It must be plugged directly into
a properly grounded three prong
receptacle. The receptacle must be
installed in accordance with local
codes and ordinances. Consult a
qualified electrician. Avoid connecting
refrigerator to a Ground Fault
Interruptor (GFI) circuit. Do not use an
extension cord or adapter plug.
If the power cord is damaged, it
should be replaced by an authorized
service technician to prevent any risk.
Never unplug the Wine Cabinet by
pulling on the power cord. Always
grip the plug firmly, and pull straight
out from the receptacle to prevent
damaging the power cord.
Unplug the Wine Cabinet before
cleaning and before replacing a light
bulb to avoid electrical shock.
Performance may be affected if
the voltage varies by 10% or more.
Operating the Wine Cabinet with
insufficient power can damage the
compressor. Such damage is not
covered under your warranty.
Do not plug the unit into an electrical
outlet controlled by a wall switch or
pull cord to prevent the Wine Cabinet
from being turned off accidentally.
Grounding type wall receptacle
Power cord with
3-prong grounded plug
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
This appliance is intended to be used in
household and similar applications such
as:
Staff kitchen areas in shops, offices
and other working environments
Farm houses and by clients in hotels,
motels and other residential type
environments
Bed and breakfast type environments
Catering and similar non-retail
applications
The appliance shall not be exposed
to rain
To connect your unit:
1 Locate Power cord box inside unit.
2 Remove Power cord from box and
insert the plug into the electrical box
on the back of the appliance.
3 Connect the plug to electrical source.

Publicidad

Tabla de contenido
loading

Tabla de contenido