Wayne Dalton 8000 Instrucciones De Instalación Y Manual Del Usuario página 22

14
Stacking Sections
Tools Needed: NOTE: For door section identifi cation see
page 4.
Power Drill
NOTE: Make sure hinges are fl ipped
7/16" Socket
Driver
down, when stacking another section
on top.
With assistance, lift second section and
guide rollers into the vertical tracks.
Keeping the ends of the sections
aligned, install remaining section(s),
except top section, in same manner.
Now fl ip up hinge leaf, hold tight against
section, and fasten center hinges fi rst,
LOCK SECTION
and end hinges last, using
(2) 1/4"- 14 x 5/8" self tapping screws.
Repeat for other section(s) except top
section.
IMPORTANT: PUSH & HOLD THE
HINGE LEAF AGAINST SECTION WHILE
SECURING WITH 1/4"- 14 X 5/8" SELF
TAPPING SCREWS.
NOTE: Install lock at this time (sold
separately) see instructions in OPTIONAL
SIDELOCK INSTALLATION on page 32.
22
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com