6
INSTALLATION INSTRUCTIONS U-HANDLE COMBO KIT
STARTING INSTRUCTIONS
Installation of the U-handle kits on units requiring wide-open throttle
start (starting with throttle trigger fully depressed) requires the follow-
ing changes to starting procedures:
1.
Lightly place knee on drive shaft to stabilize unit during starting.
Do not apply excessive downward force, or damage to unit can
occur.
2.
Firmly grasp right hand grip and throttle trigger lockout with left
hand, and fully depress throttle trigger to wide open position.
3.
Pull recoil starter handle, and start unit as instructed in Operator's
Manual.