Cleaning And Disinfection - Graham Field John Bunn DigiO2 Manual De Operación

Environmental requirements Operation Temperature: 41°F ~104°F (5°C ~40°C)

Cleaning and Disinfection

1. Do not immerse the device in liquid. Clean the device only by using a surface-clean
technique: Wipe with a clean, soft cloth saturated with a solution of 75% isopropyl
alcohol.
If low-level disinfection is required, wipe with a 1:10 bleach to water solution.
2. Wipe with a clean, soft cloth saturated with clean water and air dry, or dry with a
clean, soft cloth.
Caution: Do not sterilize with irradiation, steam, or ethylene oxide.
s
Caution: Do not disinfect with high temperature or high pressure steam.
s
Caution: Do not use the sensor if it is damaged.
s
Relative humidity: 30%~80%
Atmospheric pressure: 10.15 psi~15.37 psi (70kPa~106kPa)
Storage Temperature: -4°F to 131°F (-20ºC to 55ºC)
Relative humidity: < 95%
John Bunn DigiO Finger Pulse Oximeter
2
13