3.1.2 U
C
NDER
EILING OR
1.
Using 4 screws no. 8-18 x 0.375 in., install the brackets on the unit as illustrated in Figure A.
2.
Using 4 screws no. 10-12 x 0.625 in. or longer screws if necessary, secure the unit to the wall or
ceiling, into the studs, joists or other solid material.
When wall mounted, the unit can be positioned in any orientation to suit your need.
3.1.3 C
H
EILING
UNG
The brackets have been designed to allow that the unit be hung using threaded rods.
1.
Using 4 screws no. 8-18 x 0.375 in., install the brackets in one of both ways illustrated below. Use
nuts to secure the unit.
3.1.4 I
A
N THE
TTIC
Do not install in an attic where the temperature may exceed 160°F .
1.
Using 4 screws no. 8-18 x 0.375 in., install the brackets on the unit as illustrated above in Figure A.
2.
Using 4 screws no. 10-12 x 0.625 in., secure the unit to the joists or cross framing.
W
M
ALL
OUNTED
Figure A : Bracket installation
OR
CAUTION
VD0465
VD0469
9
VD0468