NSK Ti Max nanoSG20LS Operation Manual página 6

4. Insertion & Removal of the Bur
4-1 To Insert the Bur
1) Insert the bur until it is correctly seated in place.
2) Depress the Push Button and insert the bur into the chuck until the bur "notch" mechanism engages.
Release the button.
3) Ensure that the bur is secure by gently pulling and pushing the bur WITHOUT depressing the Push
Button.
4-2 To Remove the Bur
Depress the Push Button firmly and remove the bur.
Fig. 2
5