NSK Ti Max nanoSG20LS Operation Manual página 8

5.Connection of the Irrigation Tube
Three irrigation methods are available; External, Internal or a dual system, depending on the tool to be used
and operation procedure.
5-1 External Spray Nozzle
Connect the Irrigation Tube to the External Spray Nozzle firmly. (Fig. 3)
5-2 Internal Spray Nozzle (Fig. 4)
This method is available only for a drill with the internal spray system.
1) Set the nozzle holder.
2) Insert the Irrigation Tube into the Internal Spray nozzle.
3) Insert the Internal Spray Nozzle into the hole on the push button firmly, then into the slot on the Nozzle
Holder.
Irrigation Tube
External
Spray Nozzle
Internal Spray Nozzle
Irrigation Tube
Nozzle Holder
Fig. 3
7
Fig. 4