Lutron GRAFIC Eye 3000 Instrucciones Para La Instalación página 6

030-739 8/1/02
Dual-Feed Wiring for Two (2) FDBI Interfaces on One Zone
120V and 220-240V
The load breaker/MCB can be on a different phase than the control breaker/MCB. Connect ZONE OUT only to Lutron Hi-lume or Eco-10
Electronic Dimming Ballasts.
O = Orange
B = Black
O
B
Lutron Hi-lume or
Eco-10 Ballast
Mounting: Interface must be mounted vertically!
1. Confirm all connections and mount the Interface using the screws provided.
2. Restore power to the system.
Flush Mount
2:22 PM Page 6
H/L
N
LOAD NEUTRAL
Faceplate
O
B
Lutron Hi-lume or
Eco-10 Ballast
Surface Mount
2-gang wallbox
6
H/L
N
NEUTRAL
4
3
2
HOT/LIVE
1
ZONE
H/L
N
LOAD NEUTRAL