Belkin OmniView 17" Guía De Instalación Rápida página 7

Connecting the KVM
Switch or Server
Step 1
Make sure your KVM switch or server is powered OFF.
Step 2
Using the included PS/2 KVM Cable Kit, connect one set of VGA and
PS/2 connectors to the back of the Console. (Refer to diagrams below).
Step 3
Connect the other end of the Cable Kit to the console monitor, keyboard,
and mouse ports on your KVM switch or server. (Refer to diagrams
below.)
Step 4
Power ON the Console.
Step 5
Power ON the KVM switch or server connected to the Console.
Connecting the KVM Switch or Server
| EN-7