Swing-N-Slide Kodiak NE 5010 Instrucciones De Ensamblaje página 48

PROJECT 515
(4)
2-1/2"
Screws
2-1/2" Screws
(2 Per joint)
2-1/2" screw
2-1/2" Screws
(2 Per joint)
Fig. 40
10"
5-7/8"
5' Climbing Rock Wall will require
Fig. 40b
Min. 12 Climbing Rocks
(3) Bags of
Climbing Wall Lumber Cut List.
(1) 2x4x96 ------ (1) 2x4x59 (1) 2x4x15
(1) 2x4x96 ------ (1) 2x4x59
(1) 2x4x120 ---- (2) 2x4x60
(3) 5/4x6x120 - (4) 5/4x6x30
1. Assemble and install Climbing Wall Frame as shown
in (Fig. 40), (Fig. 40a).
2. Attach (11) 5/4" x6" boards to (2) 2" x 4" boards and
install on unit as shown in (Fig. 40b).
3. Secure Rock Wall to unit using (3) 2-1/2" screws
per side.
Note: Make sure the 2" x 4" supports do not
interfere with the mounting of the climbing
rocks.
48
Fig. 40a
(Per joint)
18-1/4"
NOTE:
Climbing Rocks.
NE 4543S
(2)
2-1/2"
screws