Swing-N-Slide Kodiak NE 5010 Instrucciones De Ensamblaje página 50

PROJECT 515
Climbing Rock Installation
1. Mark locations of Climbing Rocks on the Climbing Wall in a pattern that
will easily allow your child to climb to the deck. Make sure the bolt hole
locations are clear of wall supports before drilling.
2.Drill holes through the wall at the desired locations using a 3/8" drill bit.
Install Climbing Rocks as shown in (Fig. 42).
3. Make sure the Climbing Wall and Climbing Rock connections are secure
Climbing Rock
Fig. 42
(2) 2" Hex
Head Bolts
before allowing any children to play on the Climbing Wall.
(2) "T" nuts
3/8" Holes
Hold (rock)
(1) Loc Washer per bolt
(1) Flat Washer per bolt
50 50