NSK isoE-LUX Manual Del Usuario página 6

4. Checking the Light Probe Before Each Use
Follow the check procedure below before use. If any abnormalities are found, stop using the light probe immediately and contact
your Authorized NSK Dealer.
5. Post-use Maintenance
After each patient maintain the product as follows.
CAUTION
• Immediately after a treatment, the light probe should be cleaned and sterilized. Failure to properly maintain the light probe
will deteriorate the optic illumination point (glass fiber end), which will remarkably reduce the light transmittance.
• Do not use the following fluids to wipe, immerse or clean the product; strong / super acid water, strong acid / alkaline
chemicals, chlorine-containing solutions, solvents such as benzine or thinner.
• Do not lubricate this product.
5