Programming Auto Brew
1
To set the time of day, first press
the H (hour) button to set current
hour; then press the M (minute)
button until you reach the correct
time.
Water Filter
1
2
To program the Auto Brew, press
and hold the PROG (program)
button until the display begins to
flash.
(optional accessory)
2
3
Then, while holding down the
PROG button, press the H and
M buttons until the desired Auto
Brew time is reached.
3
4
Press and release the PROG
button again to set the Auto
Brew. Do not hold the button
down. Auto Brew is now set.
Water Filter
(Optional Accessory)
For better-tasting coffee, use a
water filter. Filter replacement is
recommended every 60 cycles.
9