Remote Control; Setting Up Your Player - TNT HSD 7570 Manual De Operación

Introduction of the remote control
1. Open the battery drawer
2. Hold in addition the equipment by point 1 (see picture) and push the cover into the
direction 2 (see picture).
3. Please insert the battery into the drawer. Pay attention when inserting the battery to
the correct polarity (/-).
4. Push the drawer back into the remote control
Operation of the DVD Players with the remote control
Always direct the remote control toward the sensor field of the DVD
Players

SETTING UP YOUR PLAYER

1. Connect the audio cables to AUDIO OUT of the DVD
player.
2. Connect the yellow cable to the VIDEO on the side of
your player.

Remote Control

8