Before Commissioning - Bresser ClimaTemp FSX Manual De Instrucciones

5 Date (month-day or re-
verse)
7 Transmission symbol
(radio-controlled clock
CET)
9 Air pressure (mb/hPa or
inHg)
11 Bar chart for air pres-
sure history
13 Humidity outdoors
15 Battery status
17 Temperature (outdoor)
19 Sensor signal status
21 Weather trend (24
hours)

6 Before commissioning

NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices,
the following points must be observed during commission-
ing.
1. Place the base unit (receiver) and sensor (transmitter)
as close together as possible.
2. Connect the power supply to the base unit and wait un-
til the indoor temperature is displayed.
3. Establish power supply for the sensor.
6 Weekday
8 Alarm (AL1 or AL2)
10 Moon phase
12 Weather trend (72
hours)
14 Humidity indoors
16 Temperature (indoor)
18 Channel info (sensors)
20 Weather trend (48
hours)
22 Singles values for air
pressure history (up to
24 hours)
9 / 108