To Assemble The Blower Pipe And The Control Handle On The Product; Assembly - Husqvarna 150BT Manual De Usuario

• Stop the engine, remove the spark plug and let the
engine become cool before maintenance and

assembly.

• A blocked spark arrestor screen causes the engine
to become too hot which causes damage to the
engine.
Introduction
WARNING:
safety chapter before you assemble the
product.
To assemble the blower pipe and the
control handle on the product
Note:
Lubricate the tubes and flexible hose to make
them easier to assemble.
1. Attach the flexible hose (A) to the pipe angle and the
control pipe (B) with the clamps (C) and (D).
C
2. Attach the handle holder (E) to the control pipe. Align
the handle holder with the flange on the control pipe.
1456 - 002 - 06.05.2021
Assembly
Read and understand the
A D
B
E
• If the spark arrestor screen is frequently blocked, it
can be a sign that performance of the catalytic
converter is decreased. Speak to your servicing
dealer to examine the muffler.
3. Adjust the position of the control handle to a safe
and correct work position. Tighten the knob.
4. Attach the cable to the flexible hose with the cable
clamp.
5. Attach the intermediate pipe to the control pipe.
6. Attach the blower nozzle to the intermediate pipe.
Note:
The blower nozzle can only be installed on
the intermediate pipe.
7. For higher air speed, attach the high speed nozzle to
the blower nozzle.
7