Remington iLIGHT IPL6500 Guía De Uso Y Cuidado página 24

Using the Remington
2c. Place the body part to be treated
over the SKIN TONE SENSOR
(touching the unit) the sensor will
immediately read the skin type.
2e. If your skin tone is suitable for
use, a high-pitched "BEEP"
will sound and the SKIN TONE
SENSOR will turn green and the
device is ready for use.
iLIGHT Ultra Face & Body Hair Removal System for Treatment
® ®
2d. If your skin tone is NOT suitable for
use, the SKIN TONE SENSOR turns
solid YELLOW and the device will
"BUZZ" once for 5 seconds. After 5
seconds, you may re-try the SKIN
TONE SENSOR (step 2c above).
2f. Once the device is enabled, the
ENERGY LEVEL LIGHT and BULB LIFE
LIGHT will turn on and the internal
fan will start. Your Remington iLIGHT
Ultra Face & Body is set to the lowest
energy level setting and ready for use!
24