Sauder Jaclyn Smith 416403 Manual Del Usuario página 10

Step 6
Fasten the HUTCH TOP (G) to the HUTCH ENDS (C and D).
å
Tighten four TWIST-LOCK® FASTENERS.
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking the
FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
Page 10
® FASTENER
D
416403
Flat edge
G
www.sauder.com/services
C