Trouble Shooting - Premium PPA1204J Manual De Uso Y Cuidado

· Let the machine runs under fan mode for 2 hours to dry out the machine internal
· Turn off machine and pull out plug .
·
Clean and dry filters , then reinstall them .
· Pull out exhaust pipe for safekeeping .
· Put the machine into plastic bag , and place it on a dry place.
P
LEASE CONTACT PROFESSIONAL SERVICEMAN WITHOUT DELAY IN FOLLOWING SITUATION
T
ROUBLE
Machine
cannot work
Machine
auto-restarts
frequently
Too noisy
Compressor
cannot work
Note: when abnormal situations are occurred, turn off machine and pull out plug, then contact
with professional electrician for help .
"THE DISPOSAL OF ELECTRICAL AND EL ECTRONIC EQUIPMENT WASTE PRODUCTS
ON THE PART OF FINAL USERS IN THE EUROPEAN UNION"
This symbol on the product or on the container indicates that this product cannot be
eliminated with the general waste. The user is responsible for eliminating this kind of waste
by throwing them away at a "recycling point" specifically for electrical and electronic waste.
Selective collection and electrical equipment recycling contribute to preserve natural
resources and warrant waste recycling to protect environment and health. In order to receive
further information about electrical and electronic waste collecting and recycling, contact
your Local Council, the service of household waste or the establishment where the product
was acquired.

TROUBLE SHOOTING

C
AUSE
Power off
water-full indicator turns on
Direct sunlight
Door and windows are open ,
many heat sources in the
room .
Filters are too dirty.
Air-inlet or air out-let is blocked Remove blockage
Machine is not put on flat
ground.
Compressor
protection turns on
Power on
Drain water out
Draw the curtains
Close the door and windows, move
out heat sources.
Clean or replace filters
Place it on flat and solid ground,
avoiding shaking
time-delay Wait for 3 minutes, then restart the
machine after temperature reduces .
10
S
OLUTION