melitta LATTEA Manual Del Usuario página 71

2 simultaneously press the button for two-cup dispensing
On / Off button
→ the symbol for decalcifying
illuminated.
3 empty the drip tray and then reinsert it without coffee grounds container,
and place the coffee grounds container under the milk shower.
→ the symbol for the water reservoir
4 Flip up the lid of the water reservoir (Fig. A, no. ) and pull the water
reservoir up and out of the appliance.
5 Pour the descaler powder into a separate bowl filled with 0.5 l of hot
water. stir in the descaler powder (e.g. with a long spoon). As soon as the
descaler powder is completely dissolved, pour the descaler solution into
the water tank.
6 Re-insert the water tank.
Warning!
The decalcifying agent can cause skin irritations.
Comply with the safety instructions and the quantity information specified
on the decalcifying agent packaging.
7 Press the button for brewing strength
program.
→
The integrated decalcifying program will start. Water flows inside the appli-
ance into the drip tray in multiple intervals. this process lasts approximately
15 minutes. subsequently, the symbol for the milk shower
nated.
8 ensure that the coffee grounds container is placed under the milk shower.
9 turn the rotary switch for the milk shower clockwise to open the milk
shower.
→ Water flows out of the milk shower into the coffee grounds container. The
symbol for the milk shower
symbol for the drip tray
Heft_Lattea_EU.indd 71
for more than 2 seconds.
flashes and the symbol for the drip tray
is illuminated.
flashes during this process. Subsequently, the
will be illuminated.
and the
to start the integrated cleaning
will be illumi-
is

09.07.2009 15:29:11