Ezviz cs-bn8 Guia De Inicio Rapido página 5

4 Start Up the NVR
Connect the NVR to the power socket with the power adapter.
1
2
Turn on the power switch on the rear panel to start the NVR.
The indicator turns on indicating the NVR has started up.
The indicator flickers when the data is transmitted via the network port.
The indicator flickers when the HDD is being read and written.
The camera(s) is/are already receiving power from the PoE ports. It may take a few moments for the camera(s) to boot
up and for the image(s) to appear on the display.
Install the EZVIZ App
5
1
Search "EZVIZ" in the App Store or Google Play Search "EZVIZ" in the App Store or Google Play
2
Launch the app and register. Launch the app and register.
Access the NVR
6
(Recommended) You can access the NVR with the EZVIZ app. Find the QR code on the upper surface of the NVR or the
start-up wizard on the display. Log into the EZVIZ app, scan the QR code, and then follow the prompts to add the NVR to
the EZVIZ account.
The default device password is the verification code on the label at the bottom of the DVR if you did not change it.
Otherwise, the device password is the one you modified by yourself.
You can also access the NVR by operating the local menu. A start-up wizard will pop up on the screen after the NVR starts,
click the Start Wizard button, and follow the wizard to set the NVR.
LAN
USB
to install the EZVIZ app. to install the EZVIZ app.
TM TM
1
2