Comfort Glow ES4215 Instrucciones De Instalación Y El Manual De Propietario página 9

CAUTION: Even though the glass is safety glass it may break if bumped, struck or dropped. Care must be
taken when handling the glass.
The bulbs fitted to this heater are LED GDSFP-1500am/X3X-304.
1. Unplug the unit.
2. If the stove has been operating, let the unit cool at least 1 hour.
3. Loosen and remove the 9 screws holding the stove back panel to the main body of stove.
4. Remove LED bulbs and replace with
5. Place rear access panel back into position and tighten screws (Do not over tighten
SERVICE INSTRUCTIONS
WARNING: Disconnect power and allow unit to cool completely
before attempting any maintenance or cleaning to reduce the risk
of fire, electrical shock or personal injury.
REPLACING LIGHT BULBS
GDSFP-1500am/X3X-304
WARNING:
The bulbs fitted to this heater are
FP202SP/X3X-304 bulbs the use of any other type of bulb
may result in a fire causing property damage and personal
injury.
~ 9 ~
.
).
LED