Installing The Downlight Housing Assembly; Important - Fanimation The inlet FPS7880 Serie Manual Del Propietário

Installing the Downlight Housing Assembly

CAUTION
To avoid possible electrical shock, be sure electricity is
turned off before installing downlight assembly.
1 . Securely attach plugs from motor to sockets on Support
Light Kit Assembly (Figure 1)
2. Securely attach Support Light Kit Assembly to the
Adapter Plate by tightening three screws provided with the
fan. (Figure 2)
INSTALLATION NOTE
Be sure to line up the curved slotted holes located on the
Downlight Socket Plate. (Figures 2)
3 . Install single CFL Bulb (included - 18 watts max, GU24
base) in the socket on the Support Light Kit Assembly.
(Figure 3)

IMPORTANT

18 watt bulb is the maximum wattage allowed to safely
operate the fan.
Use Only With Light Kits Marked Suitable For Use In Damp
Locations.
4 . Securely attach Lower Glass by twisting clockwise onto
the Support Light Kit Assembly. Don't overtighten or force
it. (Figure 4)
5 . You have now completed the assembly of your ceiling
fan. Restore electrical power.
9
Figure 1
Figure 2
Figure 3
Figure 4