Commissioning; Safety Information; Delivery Scope And Transport Inspection; Unpacking - CASO DESIGN B300 VacuServe Manual Del Usuario

Danger
► Do not operate this device if its power cable or plug is
damaged, if it does not work properly or if it is damaged or
has been dropped. If the power cable is damaged, it will
need to be replaced by the manufacturer or his service
agency or a similar qualified person, to avoid any dangers.
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if live
connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the
device can also occur.

12.4 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

12.5 Safety information

Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of suffocation.

12.6 Delivery scope and transport inspection

As a rule, the B300 VacuServe is delivered with the following components:
 2 blender bottles (400 ml / 600 ml)
 Lid for blender bottles.
 Jug / mixing vessel
 Neoprene cover for 600 ml blender bottle
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

12.7 Unpacking

To unpack the device, proceed as follows:
 Remove the device out of the carton and remove the packaging material.
 Lid for jug / mixing vessel.
 4 blade base
Please note
 Blender attachment
 2 blade base
 Motor block
 operating instructions
 Hand pump
36