DHCP
Port: Port of communication between the PC
and the DVR, is recommended to use the
default port.
Web Port: Configure the browser using
HTTP port.
Note: When you configure the network
as DHCP mode, the router will assign a
dynamic IP address for the DVR.
14
14
PPPOE
Port: Port of communication between the
PC and the DVR, is recommended to use
the default port.
Web port: In this option you can configure
HTTP communication port.
Username and password: enter the
username and password given by your
internet service provider and restart
the system. After restart, the device will
keep those data and configure PPPOE
as network type by default. If this is
successful, the IP will be set automatically
as a dynamic WAN IP address.