Important Guidelines - Auxilab 4260/50 Manual De Usuario

Turn On and Self-check
Switch on the power. Then the instrument
begins to self-check and 15 minutes' warm
up. Self-check includes the following
steps: Turn on lamps → Check Sensor →
Initialize AD → System position → Get Dark
Current → Warm up.
Finished self-check, "System calibration"
interface displays, press the keys
to select to do calibration or not.
After system do or skip calibration,
instrument displays Main Interface.

Important Guidelines


Reagents and dilution buffers can cause cauterization and other
damage to health.

Samples (nucleic
infectious and cause serious damage to health.

During sample preparation, measuring procedures and maintenance and
cleaning work, observe all local laboratory safety precautions (e.g.
acids, proteins,
WL: 500.0nm
Wait until EasyRTOS booted:
WL: 500.0nm
Wait until EasyRTOS booted:
Warm up 15 minutes............?
Press ESC to skip...
WL: 500.0nm
,
Wait until EasyRTOS booted:
Warm up 15 minutes............?
System calibration?
WL: 500.0nm
Main Menu
Basic Mode
①
Quantitative Mode
②
Wavelength Scan
③
Kinetics Mode
④
DNA/Protein Mode
⑤
Multi-Wavelength Mode
⑥
System Utility
⑦
Cancel
bacteria cultures)
10:00:00
D2
W
10:00:00
D2
W
10:00:00
D2
W
No
10:00:00
D2
W
Move Dn Select
can be