Tabla de contenido
Publicidad
719 S Titrino
Selection of the balance type and the signal at the analog output.
3.2.2.42. Config.Aux.Language
Selection of the dialog language.
3.2.2.43. Config.Aux.Set
Config.Aux.Set.Date
Config.Aux.Set.Time
Date and time.
Input format of the date: Year-month-day, two-digit, enter leading zeros.
Input format for the time: Hours:minutes, two-digit, enter leading zeros.
Date and time have to be set with &Config.Aux.Set $G just after entry of the
value.
3.2.2.44. Config.Aux.RunNo
Current sample number.
Set to 0 on power on and initialization. After 9999, counting starts again at 0.
3.2.2.45. Config.Aux.AutoStart
Number of automatic, internal starts.
3.2.2.46. Config.Aux.StartDelay
Start delay time in s. During this time, the data of the preceding determination
are retained.
3.2.2.47. Config.Aux.DevName
Name of the instrument for connections with several units. It is advisable to
use only the letters A...Z (ASCII No. 65...90), a...z (ASCII No. 97...122) and
the numbers 0...9 (ASCII No. 48...57) when the function Setup.AutoInfo
(3.2.2.86) is used at the same time.
If a name has been entered, it will be printed out in the result report (full,
short).
3.2.2.48. Config.Aux.Prog
Output of the program version.
The Titrino sends "719.0021" on requests with $Q.
3.2.2.49. Config.RSSet
Config.RSSet.Baud
Config.RSSet.DataBit
Config.RSSet.StopBit
Config.RSSet.Parity
Config.RSSet.Handsh
3.2 Remote control commands
english, deutsch, francais, espanol,
italiano, portugese, svenska
YYYY-MM-DD
1...9999, OFF
up to 8 ASCII characters
300, 600, 1200, 2400, 4800, 9600
even, odd, none
HWs, HWf, SWchar, SWline, none
$G
HH:MM
0...9999
0...999 999
read only
$G
7, 8
1, 2
83
Publicidad
Tabla de contenido
