Use; The Remote Control; Maintenance - weltico RAINBOW POWER 800 LUMENS Manual De Instalación Y De Uso

2 - USE :

The bulb automatically comes on if the transformer is supplied with current by a programmer
or manually.

2 -1 The remote control:

- The initial colour of the bulb is white, use the "COLOR" or "PROGRAM" buttons of the
remote control to set the desired colour or sequence.
- The controller stores the colour or defi ned sequence in its memory after the lighting has
been turned off by a programmer or the remote control
- The remote control also allows the lighting to be put back on by using the "COLOR" or
"PROGRAM" buttons if the "OFF" button has been used to turn off the lighting.
Previous colour
Previous sequence
Turn off the lighting

3 - MAINTENANCE

3 - 1 The remote control:
- Avoid all contact with water
- Avoid storing the remote control in a damp or corrosive place
Procedure to replace the battery:
Colour change
Sequence change
Unscrew the 5 screws then lift up the cover.
EN
Page : 9