Remote Control - Monitor Audio Gold W15 Manual Del Usuario

Remote Control

1
2
3
4
5
6
7
8
13. Enter
Selects desired menu option.
14. Right arrow
Enters the menu system. Allows scrolling through the menu (Refer to page 9).
6
1. Mute
Toggle between mute and normal operation. Mutes output
so nothing can be heard, and can only be accessed by the
remote.
2. Preset 1
Memory Preset 1. Independent for each input (Refer to
page 10).
3. Preset 2
9
Memory Preset 2. Independent for each input (Refer to
pages 10).
10
4. Preset 3
Memory Preset 3. Independent for each input (Refer to
11
pages 10).
5. Up Arrow
12
Increases Volume and when in the menu system, adjusts
the selected option.
6. Left Arrow
13
Allows scrolling back through the menu system.
14
7. Down Arrow
Decreases volume and when in the menu system, adjusts
the selected option.
8. Display Brightness
Adjusts the intensity of the display (Refer to page 11).
9. Stand By
Manually turns the Gold W15 on , out of stand by mode, or
puts it into stand by mode. This does not function when
Auto on is selected.
10. Auto ON
Toggles the Auto On feature on and off. When on, the unit
is fully automatic in operation. When off, the user has to
turn the Gold W15 on and off (Refer to page 11).
11. Night Mode
Limits the output by -20dB without loosing any of the
dynamics of the Gold W15 (Refer to page 11).
12. LEO Calibration
Runs the LEO room equalisation system (Refer to page 8).
Gold W15 Owners Manual