Maintenance; Emptying The Dust Cup; Cleaning The Filters - Shark ROTATOR POWERED LIFT-AWAY NV640 Serie Instrucciones

MAINTENANCE

To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
IMPORTANT: Do not
use soap when cleaning
the filters.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF500
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF500
Clean once a year.

EMPTYING THE DUST CUP

1
Pull up Dust Cup Release
latches and lift dust cup
off pod.
19
1-800-798-7398
STEP 1 STEP 2
2 Hold dust cup over a trash
bin and press the bottom
Dust Cup Release latch.
STEP 3

CLEANING THE FILTERS

1 Pre-Motor
3 Press top Dust Cup
(foam and felt):
Release latch to access
dust screen and remove With the dust cup
removed, take out the
built-up debris as required.
foam and felt filters,
and rinse with water.
Allow filters to air-dry
completely before
reinstalling. Tap loose dirt
off filters between washes
as needed.
FOAM FILTER
FILTER FRAME
FELT FILTER
HEPA
2 Post-Motor (HEPA):
To access the HEPA
filter, press the button on
top of the grill, and pull
the grill away from the
vacuum. Remove and
rinse the HEPA filter.
s h a r kc l e a n . c o m
20