Escalade Sports Stiga Play The Best T8521 El Manual Del Propietario página 6

10. Assemble parts to the bottom of the table top with Screws (#5) as
shown in Figure 6, Detail C and Detail D.
a) Align the holes in the Leg Mounting Bracket (#20) with the holes
in the table. Be sure that the bracket is facing towards the side of the
table and attach with Screws (#5) as shown in Detail C.
b) Align the holes in the two U-Support Clips (#6) with indentations
in table top. Be sure that the two U-Support Clips (#6) are
positioned exactly as shown in Figure 6 & Detail D.
DO NOT USE A POWER DRIVER TO ATTACH HINGE BRACKET
ASSEMBLIES (#18) YOU COULD STRIP SCREW IN WOOD AND DO
IRREPARABLE DAMAGE TO TABLE. DO NOT OVER TIGHTEN
SCREWS CAUSING THEM TO STRIP THE WOOD!
c) Align the holes in the Hinge Bracket Assembly (#18) with
indentations in table top. Be sure that Hinge is facing the inside of
the table and placed exactly as shown in Figure 6 & Detail D.
6
5
5
6
18
NOTE: DO NOT use
a power driver to
attach hinge bracket
assemblies (#18).
Detail D
DO NOT USE A POWER DRIVER TO ATTACH HINGE
BRACKET ASSEMBLIES (#18) YOU COULD STRIP
SCREW IN WOOD AND DO IRREPARABLE DAMAGE
TO THE TABLE. DO NOT OVER TIGHTEN SCREWS
CAUSING THEM TO STRIP THE WOOD!
5
20
Detail C
6
Figure 6