Power On/Reset - Napa CARLYLE ETW12FL Instrucciones De Operación

POWER ON/RESET

• Press to power on the digital torque wrench.
• Pressing can also be used to reset the torque
wrench before use.
NOTE:
If an external force is being applied to the torque wrench
during power-on/reset or wake up period, an initial torque
will be shown in the display. Some or all the lights will
illuminate and the wrench will sound a continuous alarm
tone.
To clear the display and stop the alarm press the
button.
LOW BATTERY VOLTAGE PROTECTION
• If the battery voltage is below 2.3 volts, the wrench
will highlight the battery symbol and after a few
moments turn off.
SELECTING UNITS OF MEASURE
The torque wrench displays 4 different units of
measure:
1. Newton meters (N-m)
2. Inch Pounds (in-lb)
3. Foot Pounds (ft-lb)
4. Kilogram Centimeter (kg-cm)
Pressing the button allows you to cycle
sequentially though each of these units.
SETTING TORQUE VALUES
Torque Value
Use the Up arrow to increase torque value. Use the Down arrow to decrease torque value.
ETW12FL, ETW14FL, ETW38FL
In-lb
Increases
Torque Value
7
Battery Indicator
N-m
Ft-lb
Decreases
Torque Value
Kg-cm
Rev. 02/11/13