Conceptronic CMED2PRO Guia Del Usuario página 24

ENGLISH
After initializing, the device will be ready to use.
Notices
x Usually, it is not necessary to change your video system (PAL/NTSC), but if the TV only supports
NTSC or PAL, you should use the P/N button to select a color system to match your TV system.
x Press one of the / / / buttons to move the cursor, and use the
confirm selection (enters media library, enters file folder, or starts playing files).
x Press the
/ STOP button button to stop playing and go back to FILE LIBRARY.
x Press the MENU button to show the DEVICE LIST or SELECTION MENU.
x Press the
/ POWER button to enter/exit standby mode.
x We advise you to disconnect the device from power if the device will not to be used for a long
time.
Selection Menu
If there are no Memory Cards connected to the CMED2PRO (only internal HDD present), the
SELECTION MENU will appear on the TV screen when the Media Player is turned on.
If there are Memory Cards connected, the DEVICE LIST will appear on the TV screen instead of the
SELECTION MENU. Use the / buttons to move the cursor, and pressing the
will to go to the SELECTION MENU.
Note: It is possible that it will take a while until you can browse through the menu. Before the
menu is displayed your connected device(s) will be indexed. On screen you will see:
INITIALIZING... This means that all suitable files will be indexed and displayed in your
menu.
PARTITION LIST
Change Device:
If there are more Memory Cards connected to the CMED2PRO, you can press the MENU button to go
back to the DEVICE LIST and select a device by pressing / button and the
SELECTION MENU
24
/ ENTER button to
/ ENTER button
/ ENTER button.