Publicidad
Idiomas disponibles
Idiomas disponibles
1
Marking and drilling the
STEP
glass shelf holes
Place the template in the corner of the shower where
you want to install your shelf.
Slide the template up until the points on the left and
right-hand side of the template are at the height you
want your shelf.
Use a pencil, marker or wax pencil to mark the spots
where the holes for the shelf will be drilled.
Drill the holes using a 1/8" drill bit. See caution notes.
Drilling positions
Fold here
2
Glass shelf installation
STEP
Apply silicone in the previously drilled holes on the side
and back walls. Apply silicone to the rear of the shelf
brackets (2).
Fasten the brackets in place using the screws (3).
Check me!
If installing over ceramic tile use
#10 wall anchors and drill bit for
ceramic tile. Refer to anchor for
recommended drilling size.
90°
Do not drill over fresh grout or
silicone
2.1
Check me!
2
3
3
2
Publicidad
