Belkin OmniView ENTERPRISE Quad-Bus Serie Guía De Instalación Rápida página 5

P74291ea_F1DExxxC.qxd 30-10-2003 13:56
DAISY-CHAIN CONFIGURATION
STEP 1: Set the BANK address for the daisy-chained Switch.
DIP SWITCH #
1 2 3
DOWN DOWN DOWN
UP DOWN DOWN
DOWN UP DOWN
UP UP DOWN
DOWN DOWN UP
UP DOWN UP
DOWN UP UP
UP UP UP
DOWN DOWN DOWN
UP DOWN DOWN
DOWN UP DOWN
UP UP DOWN
DOWN DOWN UP
UP DOWN UP
DOWN UP UP
UP UP UP
Page 8
BANK ADDRESS
4
BANK 00 (Default)
DOWN
DOWN BANK 01 PRIMARY/SECONDARY
DOWN BANK 02 PRIMARY/SECONDARY
DOWN BANK 03 PRIMARY/SECONDARY
DOWN BANK 04 SECONDARY
DOWN BANK 05 SECONDARY
DOWN BANK 06 SECONDARY
DOWN BANK 07 SECONDARY
UP BANK 08 SECONDARY
UP BANK 09 SECONDARY
UP BANK 10 SECONDARY
UP BANK 11 SECONDARY
UP BANK 12 SECONDARY
UP BANK 13 SECONDARY
UP BANK 14 SECONDARY
UP BANK 15 SECONDARY
STEP 2: Attach the Daisy-Chain Cable (Belkin part number
F1D9402-XX) to an available daisy-chain port of the previous
Switch, making sure that the Daisy-Chain Cables are only
connected in an "in-to-out" or "out-to-in" configuration.
STEP 3:
If this unit will be used as a primary switch with a console
attached, proceed to Step 4. If this unit will be used as a
secondary switch with no console attached, skip to Step 5.
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8