Panel Description; Left Channel; Right Channel - Roland cakewalk MA-15D Manual De Instrucciones

Panel Description

Left Channel

fig.left.eps
Left Channel
1.
L Channel Input Jack
Connect this to L channel output jack
For the connection, use the included speaker cable.

Right Channel

2.
POWER Switch
Press this switch to turn the power on/off.
3.
POWER Indicator
When the power is on, the indicator located at the side of the switch
will light.
4.
PHONES Jack
When you connect headphones to this jack, no sound will be heard
from the speakers.
5.
BASS Control Knob
6.
TREBLE Control Knob
These adjust the tones of the bass and treble. Set to center to make
the tones flat.
7.
VOLUME Knob (DIGITAL/LINE 1)
This adjusts the volume of devices connected to digital input
(13) (15)
connectors , , and LINE 1 input jacks
8.
VOLUME Knob (LINE 2)
This adjusts the volume of the device connected to LINE 2 input
(11)
jacks .
1
(16)
on the right-side unit.
(10)
.
Right Channel
fig.right.eps
2 3 4 5 6 7 8
9.
AC Inlet
Connect the included power cord here (p. 7). Plug it firmly in, so that
the cable does not accidentally become disconnected.
10.
LINE 1 Input Jack (L, R) (stereo mini type)
11.
LINE 2 Input Jacks (L, R) (RCA phono type)
12.
BASS ENHANCER Switch
Switch this on to boost the bass range.
With the switch in the OFF position, sounds are output without the
effect applied. Set to "1" to boost the bass range or to "2" for an even
stronger effect.
13.
Digital Input Connector (Optical)
This is the digital input connector for optic-fiber cable.
14.
Digital Input Select Switch
This switch selects digital input connector
panel. Select the connector used for the input signal.
15.
Digital Input Connector (Coaxial)
This is the digital input connector for coaxial cable.
16.
L Channel Output Jack
Connect this to L channel input jack
17.
SUB-WOOFER Output Jack
Connect your sub-woofer here. Obtain separately any sub-woofer
you wish to connect and use.
9 10 11 12 13 14 15 16 17
(13) (15)
or on the rear
(1)
on the left-side unit.
5